What Is Tyreseal?
A tyre life extender/conditioner & permanent puncture prevention treatment
Tyreseal is a special blend of polymers which coats and clings to the inner tyre. Tyreseal is a "permanent" puncture prevention treatment and tyre life extender/conditioner. Previously available products (and most current ones) have simply "fallen apart" at speeds of 40 mph and over, because they were manufactured for the construction industries slow vehicles, but eventually made their way into the high-speed markets creating problems. Tyreseal is not a get you home product, it is applied before the puncture occurs, and permanently seals punctures as they happen. Once installed, Tyreseal not only seals punctures, it conditions the inner casing, preventing porosity leaks caused by tiny holes and cracks. In other words, after installing Tyreseal the tyres maintain correct air pressure and the need to regularly top up with air is virtually eliminated, and with correctly inflated tyres you get better fuel economy, your tyres also run cooler eliminating that problem of heat build-up. Tyres treated with Tyreseal last considerably longer, and cooler tyres are also less susceptible to punctures. Tyreseal is water based for easy clean out if ever you need to do this and is installed in minutes through the tyre valve with very little air loss and without removing any wheels.
What makes Tyreseal different to tyre sealants that do not work?
Technology! Sealants have caused many problems that we at Tyreseal have addressed. Using a highly evolved mixture of polymers, we have devised a product that is more than capable of working in harmony with today’s modern breed of vehicles. We use advanced chemistry in our process that bonds the molecules of the sealant together at speeds up to 150mph. Previously available products, and most current ones, have simply "fallen apart" at around 55-65mph.
Performance and abilities and does not diminish with speed distance or time
Tyreseal does not have any of the failings that previous and many present products have. Apart from drying and balling up in the tyre, the biggest failings of traditional tyre sealants in a high speed tyre, was the inability to seal small holes, but the ability to seal a large dangerous hole or cut, because they contained large chunks of chopped up rubber. Whereas TyreSeal contains only tiny strands of coarse surface synthetic fibres that are stronger than steel when they interlock tightly together, but will only positively seal small holes caused by puncturing objects up to 6mm in diameter, but only in a hole that is in the tread area of the tyre, and that is shrinking in size because there is no cord damage (rubber recovery), which is 95% of today's punctures in high speed vehicles. Anything bigger, or in the sidewall, with or without cord damage, and the TyreSeal fibres just slowly bleed through the hole, giving a controlled deflation, and usually with a halt or abrupt slow down in air pressure loss at the lower pressures of 10 to 15 psi (depending on cord damage) which prevents damaged rims, and helps the driver maintain control possibly enabling continuation of the journey to remove the vehicle from a possibly dangerous location.
Through our extensive research and development, our proprietary formulation has evolved far beyond that which is commonly known as a tyre sealant - Tyreseal is a tyre safety system outstanding at permanently sealing punctures and a true tyre life extender. Tyreseal converts any pneumatic tyre into a self-sealing tyre that will maintain air pressure. Tyreseal has the ability to coat more of the inner surface of a tyre and rim without succumbing to shear and stress associated with centrifugal force that is created within a high speed rotating tyre. Tyreseal's attributes are unparalleled in the history of the pneumatic tyre.
The Tyreseal Research & Development Team developed an unrivalled proprietary process that has yet to be duplicated.
How it works
Once Tyreseal has been installed, it lies dormant at the bottom of the tyre until the vehicle is first driven. Once driven a minimum of three to five miles, Tyreseal disperses throughout the inner tyre and forms a coating on the inner surface of the tyre assembly. In order to get sidewall coverage it takes 1500+ miles to activate the FlexxaGel to adhere to more of the inner tyre. The flexing of the tyre and the normal heat build-up allows Tyreseal to seek out and eliminate common air loss problems (referred to as porosity, air migration and bead leaks). Tyreseal then transforms the tyre assembly into a sealed air chamber, capable of maintaining proper air pressure. Thereafter, Tyreseal conditions the rubber in order to retard dry rot and aging (hardening) of the casing. One treatment will provide additional longevity and cooler running tyres for the legal tread life of the tyre.
The advanced technological sealing capabilities of Tyreseal stand on guard to seal punctures as they happen. When a tyre is punctured, Tyreseal coats the surface of the penetrating object, thus preventing air loss.
When the puncturing object is removed, the rubber recovers and the wound immediately closes, escaping air siphons Tyreseal into the puncture. The fibres entwine to create a clot that prevents any additional air from escaping. As the rubber recovers, the puncture closes and the strength of the tyre holds the seal in place. The specialized polymers and fibres form the seal, thereby producing an airtight seal. The small amount of Tyreseal that penetrates through the puncture, past the belts and out through the tread area is referred to as a seal. Once exposed to the atmosphere, the seal begins a systematic cure (another proprietary attribute from the Tyreseal R&D Team). As the seal cures, it makes a positive secure seal that is impervious to water, which totally protects the belts and inner casing from outside contaminants and corrosion.
Tyreseal's proprietary formulation is one of our closely guarded secrets, which allows Tyreseal to withstand heat and the shear forces created within a rotating tyre. The thixotropic polymers stretches and recovers under mild to severe exposure of the adverse forces and continuously clings to the inner tyre. The ability to coat the inner surface against adverse conditions and centrifugal force is the reason that Tyreseal will not adversely affect a balanced tyre assembly and does not lose the ability to provide protection for the tread life of the tyre.
Tyreseal's abilities & performance is not diminished with speed, distance or time.
If the tyre's integrity is weakened to a point where the tyre and casing are unsafe, Tyreseal is designed to bleed and slowly release air pressure in a controlled way if the puncturing object has severely damaged the inner structure.
Tyreseal will not hide or mask a dangerous puncture regardless of how small the damage may be. If the integrity of the casing has been breached and safety becomes an issue Tyreseal is designed to allow air to escape in a controlled manner.
Coating and conditioning
Tyreseal coats and clings to the inner tyre conditioning the inner surface, eliminating air migration caused by porosity and bead leaks.
It is imperative that the proper amount of Tyreseal be installed in a tyre (refer to application chart). In order for Tyreseal to function, the vehicle should be driven approximately 3 to 5 miles (it is not required to immediately drive the vehicle). This initial driving allows the tyre to warm up and for Tyreseal to distribute. Tyreseal will cover the crown area in the first few miles but it will take another 1500+ miles for the FlexxaGel to activate giving more coverage of the sidewall. Unlike conventional tyre sealants, Tyreseal has been developed to prevent migration from the sidewalls and the tread area at high speeds. Once the initial driving/usage period has been attained; Tyreseal covers more of the inner surface of the tyre.
Tyreseal is a proprietary liquid coating that never deteriorates within the tyre and will continuously stand on guard to protect tyres against air loss for the legal tread life of the tyre.
Will not cure or harden inside the tyre
People often ask, "If Tyreseal cures from exposure to outside air, then why doesn't it cure by the air inside of the tyre?" Tyreseal transforms the tyre and rim into a sealed air chamber. As the vehicle is driven and the temperature of the tyre increases, a portion of the liquid base vaporises within the tyre assembly's inner air cavity, as the tyre cools, the moisture condensates back into the formula. The inside air actually becomes part of the system. The sealed air chamber prevents outside air from entering or inside air from escaping. Constant air pressure maintenance is not required.
Positive secure seal
When a tyre is punctured, Tyreseal is forced against and around the puncturing object by the inner air pressure, thereby preventing air from escaping. If the puncturing object is thrown out of the tyre by centrifugal force or is pulled out, the inside air forces Tyreseal into the puncture and immediately stops air loss. Special fibres entwine, forming a seal, then as the rubber recovers, aided by the tyre flexing as it rotates, the inner air pressure forces the seal well into and through the puncture. Once Tyreseal is exposed to the outside air, a curing process begins. The cured seal extends well into the puncture, thus providing a seal that is impervious to water (rain, snow, mud, etc.). As this seal cures, it is transposed into a permanent rubberized seal, protecting the inner casing and steel belts against contaminants entering the puncture.
The 80/20 syndrome
The seal is permanent because of two very important attributes of Tyreseal:-
A/...there is no shrinkage of the drying polymer in the puncture because the gel is 80% polymer and only 20% liquid because we do not use cheap ingredients that bind huge amounts of water. It is common for similar products to be the other way round with 20% polymer and 80% liquid.
B/...The gel dries and cures to a firm, flexible and rubber consistency which means the seal will flex with the puncture causing no air loss over time.
It is a fact that any viscous wet compound containing fillers such as fibres and rubber particles will initially seal a puncture whilst in the wet state because wet compounds will flex with the tyre in the puncture, but the problems arise in many of these "so called" similar products when the liquid escapes out of the puncture into the atmosphere causing the compound in the puncture to dry back to the original ingredients. When dried out these "so called" similar products will vary in looks and texture because of the vast difference with ingredients used in these tyre sealants to such as:- Biscuit, Plasticine, Putty, Paper, Crystalline, Flour, Sticky pritstick, Bluetack, cement, clay etc. The descriptions and looks of many of these dried out products are never-ending, but it is a fact that in the wet state these gloopy tyre sealants all look very similar, except in colour, but that is where the similarity ends. Many of these compounds that have usually been formulated by people without any knowledge of chemistry whatsoever, once dried out in the puncture will eventually fail, resulting in a flat tyre, sometimes within days or just weeks after the initial puncture.
The eight images directly below are of Tyreseal and six "so called" similar products that have been allowed to dry out in a laboratory oven at 50 degrees C for 24 hours. When fully dry Tyreseal has very little shrinkage and is flexible and firm which is the attributes required of a dried out tyre sealant in the puncture to permanently seal the puncture, and especially in the low speed market were punctures can be caused by puncturing objects up to 30 mm in diameter. It is our trademarked secret ingredient "FlexxaGel™" that gives Tyreseal so many of its quality attributes.