Installation Guide.

  1. Place the pump onto the 2-liter container and twist it tightly.
  2. Attach the flexible tube to the pump and turn on the switch.
  3. Follow the ON/OFF switch instructions (Open or Closed).
  4. Prime the pump by pumping the handle until the tube is filled with sealant.
  5. Remove the valve core from the tire using the provided tool.
  6. Quickly attach the tube to the valve to prevent air loss and turn on the switch.
  7. Depress the pump handle to inject the right amount of sealant according to the charts.
  8. Once done, turn off the switch, remove the tube, and replace the valve core.